Quote:
I made mine, and there's a good site done by Sandmann that tells you exactly how. however he says you can't fit 2 led's in the tube. I have. All I did was make the same as the other idiot light replacements, carefully added 2 leds, in parallel and in reverse polarity to each other. Then wrapped the legs of each led in tape so they don't short themselves out.
I did a similar thing with two superbrightled #74 leds that I soldered onto a larger connector made out of a crimp-on connector (and mauled with a pair of pliers).
A positive attitude may not solve all your problems, but it will annoy enough people to make it worth the effort. Herm Albright (1876 - 1944)
| 
