The signals are Kurkyan or how ever it's spelled I got from my friends bike shop. They are available anywhere. Mine are LED and require a new flasher or a load resistor to work but they make the same lights with a bulb in them instead that doesn't require anything to use. The front all I did was drill the stock mounts and mount to the top of the mount instead of under. They have a threaded hollow bolt that the wire comes out of. On the back I used a stainless spacer from the hardware store and a longer threaded stud. On both I cut the plug off my old indiwinkers and soldered them on the new lights so I can unplug them if I needed to.

The risers are 4 1/2" rise and 1 1/2" pull back made for HD ,got them from Ebay for $39 and added America bars. I used America throttle and clutch cables and break line and they work fine. The throttle cables had to be routed to the other side of the frame.

I learned all I need to know about life by killing smart people and eating their brains.
Eat right ,Exercise ,Stay fit, Die Anyway!