This was a DIY project, the main difference between the switch I used and SRS Chome's switch is the size. When you use mini toggles or micro switches the wires need to be soldered on where as the larger switches will either have male spade ends which use a female end on the wire or an eyelet end on the wire and attached by a screw. So that allone will change the difficulty. And as far as I know, the switch from SRS Chrome is just a switch of your chosing, you will still have to do the wiring yourself, but isn't all that hard (in my opinion) all the wires are coloured and the accessory plug that the driving lights plug into already has a high beam and low beam leads in it, I had to change the whole plug though cause I couldn't find replacement pins for the factory style plug. That all being said, you can get an idea of what the project like and you can judge for your self. I'm sure you can find aftermarket kits for this type of thing, but you are limited to the components that come with it.
