Quote:

Great Job,
especially like the bobbed rear. Any problems with fitting the Lucas on. Did you fit the indicators yourself to the light or is taht how it comes.
Was worried a bit about the curvature, any problems?
Cheers
Chris



Thanks, Yes I fitted the indicators myself. I ordered all of the lights from bellacorse. To fit the indicators you just have to drill the holes in the side and space the indicaors out a bit with tube. I used an old shower rose (chromed copper pipe) but stainless would also work OK.

The lucas light fit OK, but you have to make some wedge washers to tilt the number plate up a bit otherwise it rests on the fender.

TBA, Stainless extractors / drag pipes, 65mm over forward controls, Thruxton needles, 904cc, head ported, lowered 1-inch, Console removed, relocated battery box, Australia.