I managed to get the wiring mod done today. Squeezed it in between mudding sheetrock and building a bench, whew I'm beat.
Here's my results before,
1500rpm = 14.1, with the light bar on 13.2
3000rpm = 13.6 with light bar on
After the mod,
1500 = 14.5, with light bar on 13.0
3000 = 14.3 with light bar on. Noticeable improvement.
As you can see I gained almost a complete volt,nice.
Here's the results with light bar on and the Gerbing Gloves on.
1500 = 12.4
3000 = 13.4
[image]
[/image]
Red wire running across the crank breather pod, fused 30 amp.
