The stainless mesh is kind of like a Chinese finger trap (they make different color nylon mesh too) When you push it together the diameter expands allowing you to slip it over the ends, then pull it and it shrinks tight to the wire. Then finish the ends off with a small piece of shrink wrap or tape or the fancy hose clamps with covers.

EDIT: You also have the option of taking the pins out of the plastic plug connectors then slipping the shrink wrap over the wires and then put the pins back in the connectors. This way you still wouldn't have to cut anything.

Last edited by The_Dog33; 01/05/2008 2:14 PM.
I learned all I need to know about life by killing smart people and eating their brains.
Eat right ,Exercise ,Stay fit, Die Anyway!