My pre ride inspection.
Day before ride,
1, Wash and then blow dry Bike.
Then lift bike up on jack and
2, Polish Bike, I find washing and polishing is best way to find if anything is broken/loose/missing.
3, Check tires for cuts and or nails.
4, Check air pressure, which includes cussing like a sailor as i rip my fingers trying to get the Owners Manual out the back of seat cause I've forgotten the correct air pressures...AGAIN.
Day of ride
1, Check Oil
2, Check Chain and lube
Insert key and go.
PS, on your pictures post. What are the two extra clocks you have next to your speedo. Couldn't quite make them out in the picture.
