Well,
after taking everybody's input, from the listed post (http://www.bonnevilleamerica.com/forums/showflat.php?Cat=0&Board=Carbs&Number=271700&PHPSESSID=&fpart=1#Post271700) I tried almost everything I could. I made my own monometer, balanced the carbs, which by the way were so far off I had to turn the engine off to adust and then turn on to check initially. But they are good now. I pulled the shims out and tried the tbs needle un-shimmed, then put the 45 pilots back in, then tried the stock needles with one shim. Still has the hesitation from low to early mid range throttle. It seems to only be most noticeable if I roll the throttle slowly. If I pound on it, it is not as bad, but still jumpy. Could it be due to a bad vavle seat?? This is annoying the ****** out of me!!!