Help: what wrench size?

Check out the new Gallery

wicked red 1100
by mag10, August 21

first ride
by NemoJr, April 1

Steve McQueen inspired
by Feral, November 28

GaRally22
by chy, September 18

Print Thread

Help: what wrench size? #216399 11/08/2007 9:16 PM
Joined: Sep 2007 Posts: 42 Western New York mgtbeck49 OP Greenhorn
OP mgtbeck49 Greenhorn Joined: Sep 2007 Posts: 42 Western New York	Hopefully this is an easy question for someone. What type and size of wrench is required for the "battery strap fixing" on a 2007 Speedmaster? No luck in search here, shop manual or owners manual. Obviously I also need to start building a better selection of tools. Thanks.

Re: Help: what wrench size? mgtbeck49 #216400 11/08/2007 10:01 PM
Joined: Jan 2005 Posts: 2,152 Ottawa Ontario Canada Bill Oil Expert
Bill Oil Expert Joined: Jan 2005 Posts: 2,152 Ottawa Ontario Canada	i thought the battery strap was held with a torx screw just above the battery - where is the fastener you're referring to?

Re: Help: what wrench size? Bill #216401 11/08/2007 10:09 PM
Joined: Sep 2007 Posts: 42 Western New York mgtbeck49 OP Greenhorn
OP mgtbeck49 Greenhorn Joined: Sep 2007 Posts: 42 Western New York	It is the screw. Sorry, the manual calls it a "fixing". Just not sure if it takes a torx wrench or Allen wrench. If torx, what size? Thanks.

Re: Help: what wrench size? mgtbeck49 #216402 11/08/2007 10:39 PM
Joined: Jul 2006 Posts: 1,337 Fort Worth Texas Cowtipper Learned Hand
Cowtipper Learned Hand Joined: Jul 2006 Posts: 1,337 Fort Worth Texas	Torx T-40 2002 Bandit 1200/ GSXR cams/ 1277 BB Kit/ Holeshot header and can/ 38mm flatslides/ a good head/lotsa hp/lotsa tq- lots of rear tires...

Re: Help: what wrench size? Cowtipper #216403 11/08/2007 11:20 PM
Joined: Jan 2005 Posts: 5,537 Hagerstown, MD ssjones Check Pants
ssjones Check Pants Joined: Jan 2005 Posts: 5,537 Hagerstown, MD	I relaced mine with a 4 mm hex-head that matches the rest of the fake air filter screws. One less tool to carry. Al

Re: Help: what wrench size? ssjones #216404 11/11/2007 10:57 AM
Joined: Jan 2005 Posts: 2,240 Houston Blackwind Oil Expert
Blackwind Oil Expert Joined: Jan 2005 Posts: 2,240 Houston	Quote: I relaced mine with a 4 mm hex-head that matches the rest of the fake air filter screws. One less tool to carry. Now that is a smart idea - wish I had thought of that.... Keith Houston Ridin'Texas '04 Speedmaster AI removed, Pingle, UNI Filter, 1 shim, straight-through slash-cut TORs, Stage 1 DynaJet, 140 mains, 3 turns, 16/42 final drive, 115K 2020 T120 Black

Moderated by bennybmn, chy, mert

Link Copied to Clipboard

2025 Arkansas Rally
by roadworthy - 04/24/2025 7:57 PM

Bonneville America Forums Forums Technical Forums General Tech Help: what wrench size?