Hi, Just fitted SS short cuts and thinking of changing jets.
Just wondered what you guys are running or would recommend with the AI and snork gone and a Uni fitted.
Currently running 125 & 42 jets with TBS needles and 1 shim. Screws are about 3 out.
Looking at Diq's site I was thinking of 130 & 45's, leaving the TBS's in without a shim. I also have some thumb screw air mix thingies so I'll fit them and perhaps drill the slides?
I've also taken out the baffles, It's bl**** loud, I'm not sure i'd stick with it.. would leaving them out mean upping the jets?
Sorry for all the Q's but would appreciate any thoughts.
L
