Quote:
I removed stock plate holder and use the rubber gasket as templet. Had a piece of 3/16 ss plate cut and drilled and mounted it useing the rubber gasket as a spacer.
I removed Stock turn signals , going to find some cover caps. Also purchased the back rest/Rack combo to fit with my roadster seat. I'm going to leave the plate holder,the rack comes out to there anyway. The rack has thrown a little twist in the spacer thing as it is now a flat surface for the hardbag brackets,it had spacers to fit in the rear chrome fitment,so I'm good there,so far. How did you run your wiring for the rear LED's? Drill an additional (5th) hole in the side of each bag? Any input Midlifespeed would be fantastic! Thanks Speed. 
Last edited by speedblastr; 01/18/2008 9:58 PM.
sometimes ya' gotta hold a candle to the devil.-06' Blk Spdmastr,TBpipes,Plrs-Blmth,3Trns,AI Out, ,UNI,130/40,1shm-Ea.,TBS ndls.
| 
