Just cobbled up some bar end weights out of a couple of large bolts I found. 3" long, 3/4 " dia., 3-4 oz.s, milled ball on the end. I split a piece of rubber hose lengthwise and taped it to the sides of the bolt, put some o-rings between the ball end and the wrapped thread and crammed them in.
Looks great. When I had the bike up on the lift, I tried to spin front wheel to see if it was off balanced but, it only spun a couple of rotations before stopping. I can hear it binding somewhere. I'm pretty darn sure it isn't the axle. No play at all. Could it be the caliper binding somehow?
Haven't lost the shakes by adding the weights, but it is a bit less pronounced. Perhaps it's caused by whatever is binding.... I've got some trouble shooting to do. Try to get pics up this weekend. Low profile seat coming today!!!
