|
|
 Rivco 2" pull back risers
|
Joined: Feb 2006
Posts: 786
3/4 Throttle
|
OP
3/4 Throttle
Joined: Feb 2006
Posts: 786 |
Any one using them? Was wanted to know if the stock cables and hoses were long enough? How do you like them?
Thanks
05 TBA Mulberry/Silver, Thunder Bike pipes, K&N single Filter, 132 main Jet's, Snorkles Removed
|
|
|
Re: Rivco 2" pull back risers
|
Joined: Jan 2005
Posts: 7,643
Monkey Butt
|
|
Monkey Butt
Joined: Jan 2005
Posts: 7,643 |
you mean these  Cables are great, no problems at all 
Ray(UK)
|
|
|
Re: Rivco 2" pull back risers
|
Joined: Oct 2006
Posts: 219
Adjunct
|
|
Adjunct
Joined: Oct 2006
Posts: 219 |
Greetings,
I also have the Rivco's { Via Fast Eddy} and they worked wonderfully. No problems with cables at all.
couple of words of advise, make sure you have a THICK Towel on your tank or an extra set of hands to help. And be Careful not to strip the bolts on the way out. The position / angle of the bolt is kinda odd. { at least it was to me.
I do not ask for a fair life, only a Just one.
|
|
|
Re: Rivco 2" pull back risers
|
Joined: Sep 2006
Posts: 4
Complete Newb
|
|
Complete Newb
Joined: Sep 2006
Posts: 4 |
I also have them and cables are long enough. One thing you should do is run the bike and move bars to the right and to the left and make sure the throttle doesn't stick.
|
|
|
Yes and I like them.
|
Joined: Jul 2005
Posts: 124
Adjunct
|
|
Adjunct
Joined: Jul 2005
Posts: 124 |
The stock cables are just fine with the Rivco pullback risers. However, you might need to re-route them, which is necessary anyway.
I like the pullback risers and they look great. I would not hesitate to buy them all over again.
I'm 6' tall with long arms and legs.
|
|
|
Re: Yes and I like them.
|
Joined: Feb 2006
Posts: 786
3/4 Throttle
|
|
OP
3/4 Throttle
Joined: Feb 2006
Posts: 786 |
Thanks for the info Everyone!
05 TBA Mulberry/Silver, Thunder Bike pipes, K&N single Filter, 132 main Jet's, Snorkles Removed
|
|
|
|
|
|
|
