Well that was relatively painless. I took a 2 1/8" hole saw and cut the rearmost baffle out of each pipe. Then with a 1/2" drill bit welded onto a 30" rod I drilled three holes in the other two baffles. The performance pickup was immediate! It seems like the motor works alot less and my cruising speed 65+ seems alot smoother. The sound is pretty good too! I'd like a little more bark and will probably go to drag pipes or shorty turn outs but that's a winter project. As for now...............We RIDE!!! Thanks to all for offering advice and info. Total cost of the project- $13.99 for the hole saw. I mooched everythign else. GOd bless the pack rat!-Bro Fozzie
