We're probably getting out of the relm of this post. One test to see if you are running lean is to get the unit on the cam (say at 100kpm in 5th) then apply full throttle for a couple of seconds then cut back to 7/8 throttle. If the unit seems to pull harder at 7/8, you are still too lean. The opposite, and you are too rich. Got this from the Mikuni manual on Pat's site. This test shows mine is still a bit lean with 130 mains. Still need to try a shim on the needles to see if this would correct it.
"Popped out for a ride on the new kitchen...Hmmm" My better half would agree. I don't think she would feel she had a warped sense of humour also.
