Some more pics
I didn't take much off each lower corners of the windshield to get it to fit closely around the lightbar. It does take a little bit of finesses to put it on and off but everything gives a little so it is pretty easy. The whole thing can be taken off or on in about 5 minutes.
Lowers Mounting Hardware
This is an experimental setup right now.
The hardware on the lower fork shrouds is MEM9891
got them from FastEddy
The hardware on the upper fork shroud is the clamps from MEM9887 and extension arms from MEM9891.
I think my final configuration will be to remove the upper shroud hardware and make a custom set of plastic shield for the MEM9891 lowers. I want the same amount of coverage the experimental set has and maybe I form the plastic with a curve at the top to close the gap with the windshield.
More ideas then time or money and sometime know how.
