Here is some pics of my set up.
The Memphis Shades was a 21" Fats. I cut out sections for the lights on the light bar and trimmed with auto door trim from Advanced Auto Parts. I took 4" off the top so I could look over the screen instead of through it. I like the wide protection, it works for my build. I am experimenting with lowers right now to try and eliminated the last little bit of buffing from air coming up from around the tank. The lowers are proving to be a little tricky due to my relocation of the front turn signals. By the way good link on "Cutting a Plastic Windshield", the difference was I used a Dremel with a cutting disk.
If you want some close up pics just shout.
