Quote:

I noticed that Pat's jetting calculator shows the TORS in a stock config or with 1,2 or 3 baffles removed. Jetting is different for each config. Where would our pipes fit equipped with the straight through passage and some packing surrounding it?

Any ideas?



I'd like to know too. As I've got short slash cut TORS that are straight thru with "glass pack" style packing. They're still the break-in stage, as I've only got 500 mile on the bike. But they sound good with a UNI filter & Polaris rubber bellmouth velocity stock on the stock airbox.

Any insight on this would be appreciated. I've also got the following:

TBS needles & 1 shim
Nology coils
Bremi wires
NGK Iridium spark plugs
NB primary mixture screws at ~ 2.25 turns out
120 stock mains, soon to go to 122 or 125 (and remove the shims.)

Thanks!
Jim


2008 Kawasaki Versys http://public.fotki.com/mackdaddy/various/2008-kawasaki-versys/