I moved my rear blinkers in and installed "bullet" lights. All I did was remove the stockers from the licence plate mount, I cut the wiring at the bulb socket and pulled it out of the mount tube. Then I marked and cut the tube (I used a hacksaw and cleaned it up with a file). Then I got a thread tap to match the threads on the new lights and run it into the tube. Then I fished the new wires thru the tube and screwed the new lights in. Then solder the stock plug onto the new wires, re-mount to the licence plate mount and its
For the fronts I made up a mount and fished the wiring when I mounted my new lightbar and windshield.
