no pic's (and no way to get one for a few days or so) BUT it's easy...go to any auto parts store...get a starter push button (just a high amp momentary contact switch) two sections of heavy GA wire (8-10 GA) also at the part store...
I one wire to one side of the soleniod (large lead) one wire to the other, connect them to the switch...
I wrapped the new "harness" with ele tape to 'purty' it up...and help keep it neat and tucked away...the switch I got from the GA NAPA dealer has a rectangular body which I tie wraped under the tank to the box shaped back bone of the frame just behind the rear engine mount so it can be reached with the left hand by reaching under the tank...
BUT REMEMBER YOUR BIKE WILL START WHEN YOU PUSH THE BUTTON>>IN GEAR KICKSTAND DOWN...Don't ask me how I know!
