Don't know if there is one in the Vault or not and I have no problem typing this up, so.....
When I initially installed the Pingle, I tried the blue goop and the gasket that came with it. It blew out with less than 4 lbs. of torque! Went to NAPA and got some gasket material (the dark gray stuff) and used red RTV as a sealant. Almost three years later, the RTV turned to black, sticky goo which is not a good thing. Back to NAPA, this time for a product called
Seal-All Cleaned everything up and used the adapter plate to trace two gaskets. Used an Exacto knife for the holes, btw. Applied the Seal-All to both sides of both gaskets, the adapter plate, and the tank. Put it all together and hand tightened the bolts to give it some pressure and assembled everything later.
Seal-All and the gasket material from NAPA is the only way to go.
