I removed all the (2) shims, 3 turns out, runs better now, more power, but still idles min 1500 rpm. Turning screws fyrther out no effect, turning screws all the way in has minor effect on idle (slightly lower rpm), increases popping greatly tho.
Do I need to go to 45 pilot? Is this the cure?
Am I running a bit too rich, I think so.
Boy, major power improvement in mid rpms, sheesh those TBS needle are good!
cheers,
Don
----------
Don
04 BA,TBike pipes,AI,FREAK-150 mains,TBS,42 pilot, 3 turns,\progressive fr and rr shocks, 18T,and lotsa chrome
| 
