Bonneville America Forums Forums Technical Forums Performance Mods Valve clearance

Hello,
According to the manual the valve clearance for the TBA intake valve (cold engine) should be 0.15 - 0.20 mm

At both cylinders I get 1 intake valve 'go' at 0.10 and 'no go' at 0.15 and 1 intake valve with 'go at 0.20 and 'no go' at 0.25. To me this seams that I have 2 valves slightly below spec and two slightly above spec.
So now I am wondering if this is something that I should try to correct asap or if it is liveable at the moment. Second question is if I correct it should I aim on the low side or the high side?
Thanks for any inputs
Regards
Hasse