Bonneville America Forums Forums Technical Forums Accessories Help With Lights

Ed i prewired my bike for a set of 55 watt lights from jc whitney(still waiting for the lightbar). if you go to radioshack, buy a smaller 30 amp three prong rocker switch(you should already have the wiring and fuse)than what came with the kit. remove the rubber cover where the clock adjuster is located and carefully sand down the ridges until the surface is flat, then using a step drill bit enlarge the hole just large enough to slip the connectors through tighten it up and your done. everything will look like it was production and the wires will lay under your console. by the way don't forget to remove the fuse from the hot wire until you're done. if you check out my pic you will see the rocker switch placement.