I bet this is in the archives somewhere but I thought I would share after multiple mosquito bites and lots a cussing. My neutral light stopped working on my first shake down ride after putting my ride back together. I ran through all the connections...took the dash off, pulled the bulb, got out the test light, ran through the wiring diagram in the Haynes manual..etc.etc. Out of desperation, I crawled under the bike while it was on the lift, tada!!!!
There is a blade connector hidden in a crevice on the bottom side of the crankcase just ahead of the oil filter.....my connector wern't connected. A quick "adjustment " with a pair of pliers and bingo...light is back to working. Hope it saves somebody some frustration.
