Bonneville America Forums Forums Technical Forums Custom Corner How do i remove all 4 fork shrouds?

Upper shrouds are a snap. I did mine in a few minutes.
** If you have a socket big enough you can skip step one and remove the upper yoke and bars as one piece. I did not so here is what I did.
1) Remove handle bars with risers intact (this way there is no need for extra work and re-aligning the bars! (two 14mm nuts)
**I wrapped the headlight and front end with a towel and rested the bars gently on the towel and I think I zip tied them just so they didn’t accidentally move around on me.
2) Remove big chrome nut on yoke.
3) Loosen two allen head (6mm) screws in yoke.
4) Pull up...shimmy if you have to.
5) Slide shrouds off.
Reinstall by opposite steps. Yoke will only go down to the same position it was in. If you are not reinstalling different shrouds you may want to take a measurement just to be safe.