waaayyy to rich.
if you are will to tinker
this is what you need to do.
drain the carb bowls , remove the carb bowls.
remove the main jets and check size.
remove the pilot jets and check size.
then let us know what you have so we can make more
educated advice.
I think your mains a too large , but not sure about your pilots.
you want the bottom to be just lean enough that it does not
foul up on you in traffic and city riding.
and you do not want the main so big that highway riding
fouls the plugs ( which you sould like ).
also, check the mixture screws ( how many turns out )
