Bonneville America Forums Forums Technical Forums Exhaust 07 America Exhaust

Very easy. I in fact have a set like that on my Speedmaster right now. Have to leave a small part of the taper or cut them pretty darn short since leaveing part of the taper is behind that last baffle and if you cut where the taper starts you will be cutting directly into the baffle plate. I never personally did a set of 07 pipes so it is possible they changed things inside since the 07 has the catalyst. The catalyst is held in by a steel pin and is soft so don't beat on it it will just smush closed.If you use a chisel or air hammer on the first baffle keep it off the edge a little so you don't catch the mesh on the inner wall.

Edit: I cut the taper off with a horizontal band saw.