Quote:
My only concern is that I will damage the bikes wiring
You won't hurt the bike that way. If you leave the earth wire floating and use the two light wires it can run both sides of the globe. Have a look at the globes while they're flashing and see if you can tell if one or both filaments are lighting up. I'd be very surprised if Greybeard's colour codes weren't the right ones, but if not, whatever works. Even if you ARE running both filaments it won't bother anything, since the flasher's capable of running trailer lights as well as the bike's.
Just had a think about it - you SHOULD be able to tell from a close look at the socket which wire goes where. Two of them will go to the two spring-loaded contacts in the base of the socket, and one (the earth wire) will go to the body of the socket.
Last edited by Sandmann; 06/02/2007 11:43 AM.
