I have just hooked the indicators up and have ended up with the blk/white wire connected to the black wire on the bike and the red wire connected to the other one which i think from memory was green. This seemed to be the only combination that would flash at around the right timing. Hooking the blk wire to blk on the bike made for very fast dim flashing. As you have no doubt already gathered i dont really know what i am doing. My only concern is that I will damage the bikes wiring. So now I have the blk wires not connected at all. Incidentally I should mention that i am at this stage still running std front indicators till i make some brackets for the new ones. Put my mind at rest experts.
