A question for the wiring/electrical folks …..
I’m thinking about placing a
Stebel 139db “get the F out of my way†air horn in my gutted airbox. I don’t care for the look of this horn in the conventional location and there’s less blockage to the oil cooler with the horn removed. Absorbed current of the Stebel is less than 18A. 14-16 gauge wiring and a 30A fuse are recommended.
I know a relay is required and the concept is simple enough.
Please tell me if I’m way off the mark here. I’m considering employing my unused accessory connector for power to the relay. It looks like it’s a stand alone circuit to fuse #3 (currently 10A) per the schematic.
Is the existing wiring for this circuit at least 14-16 gauge (I’m a lousy judge of gauges by eye-balling it) and will said wiring handle a 30A fuse as there is nothing else in the circuit?
Thanks,
Tom
