When I installed the Freak, I rejetted because I would rather have a richer mixture than lean. Started with the supplied 160s which turned out to be way too rich even when I put on Epco pipes. I went down to 155s and finally settled on 150s.
The only way to get the airbox out without jacking is to cut the heck out of it. Many people have done it this way so if you don't have a jack and don't care about saving the airbox, rip that sucker out of there!
Here's a thread from the old board about my Freaking experience:
http://www.bonnevilleamerica.com/message...&startat=41
