Quote:
A lot of folks use one large hole at the bar center for the wires. Not to rock the boat, or to suggest otherwise -- but I drilled two 1/2" holes for the wires near the bar's center, as my deal is to have a third wire dead center for the bar mounted tach.
An alternative to stainless loom is plastic chrome loom.
I used two holes and found some real nice stainless material to use to house the wiries, both from the bars to the lamp and from the signals. Take a look.
'06 Speedmaster, DBA Performance Pipes, re-jetted, needles, Snorkel / AI removed, shiny bits......
| 
