OK, I've ALMOST cured the popping from my TOR Shorties. Enough that I'm OK with it and will not be worrying about it anymore. Here's what I've done:
AI removed
Right idle mix screw 3 1/2 turns
Left idle mix screw 4 1/2 turns
Carbs linked at the vacume ports
No other mods.
The Rt/Left idle screws are different because the left was running leaner. I can feel no adverse effects from this combination at various speeds. Someday when I get the time I'll make a carb vacume balance guage and balance the carbs, but for now...I'm done
