Welcome Keith! A typical mod for our bikes when putting on pipes is remove the snorkel from the airbox(it's under the seat), along with AI removal, and then re-jet the carbs. Pat/Dinqua, who is one of the moderators around here, has a
great website with instructions on how to re-jet the carbs. Download the jetting calculator mentioned earlier in this thread first to get an idea what size jets you'll need. You can order them from either
BellaCorse or
newspeedmaster.com . If you run into any problems, don't hesitate to ask for help. That's what these forums are here for.
For anybody who might read this thread, earlier there was mention of jet sizes. I always thought the intermediate sizes were .005mm. What I mean is the size graduation was like this....130, 132.5, 135, 137.5, 140, etc. So it seems to me some vendors might round up while others round down. That's why you get 137 or 138, but really they're the same size.
