Quote:

btw, this might sound stupid, but i've never understood where to measure chain slack? does the measuring point need to move the full 1.2 inch, all the way down and all the way up by pushing pulling?

cat



I find the owner's manual instructions to be confusing at best. I hold a tape measure along side the bottom run of the chain. Raise the chain with a free finger, adjust to the tolerences. I've only had to adjust twice - actually only once. An adjustment was made at the 600 mi. service and I recently tightened just a bit at approx. 8000 mi. It actually was within the tolerence at 8000. I just snugger it up a bit.