Quote:

If you do it yourself, a few tips. Don't just remove cover bolts and yank cover off like I did. Disconnect breather hose at top behind cover. After bolts off, push breather pipe to pop cover off. The internal aluminum pipe assembly fits in socket on backside of cover and is easily bent.




If you have later than 05 model, you don't need to remove the breather hose because it is attached to the engine block, not the cover as in earlier models.

TBA, Stainless extractors / drag pipes, 65mm over forward controls, Thruxton needles, 904cc, head ported, lowered 1-inch, Console removed, relocated battery box, Australia.