Yet another electrical problem on this bike, I've popped two fuses each on the #8 and #10 fuses, both 5A fuses. The #8 fuse is for the speedo / tach illumination, and the #10 fuse is for the front position light / rear tail-light. I've pulled the rear fender to inspect the wiring to the rear tail-light, and it looks fine. As near as I can tell from the lighting circuit diagram on page 16.66 and 16.67 of the service manual, the only device that the two circuits have in common is the ignition switch. If anyone can lend assistance, I'd greatly appreciate it! Thanks. At least my fricking car is reliable!
