Quote:
Did mine in an afternoon start to finish... its really not that hard...the HARDEST thing I found was finding enough wire of varying colors...I ended up using a bunch of sharpies to color code the wires...
JUST BE SURE YOU WRITE YOUR CODE DOWN BEFORE YOU TAPE AND PULL....forgetting which wire goes where AFTER its taped and pulled thru the bars could REALLY bite!!!
Also I wraped each side in ele.tape (made a harness) prior to fishing them thru the bars...coat them with a bit of dilectric gease and they pull thru with NOOOO problems at all!!
Good advice my friend - thanks much. 
'06 Speedmaster, DBA Performance Pipes, re-jetted, needles, Snorkel / AI removed, shiny bits......
| 
