Thanks for all the replies....
I thought maybe there was something new out there since the last time I Googled the night away looking for cables..
I'm going to call Bella Corse and let them make me some cables.
Just a bit more info, I had to remove the "Jim's Spacers" when I installed the buckhorn bars. I "tweaked" the original routing of the throttle cables but never disconnected them. Now, my stock cables work, but they are just a bit too tight for my liking. And, for me to align the buckhorns perfectly with the forks would put the ends of the bars right on the petrol tank at full turn.
So, I will let Bella Corse advise me on the length and put the spacers back on.
Thanks again for the input.... yunz are too good to me...
