Quote:

I just got a metal drill bit and drilled holes as close to each other as I could around the baffle and then you can pull it out with channel locks or pliers. At first I was just going to drill the holes and see if that made a difference in the sound but the holes weren't enough.

-PES



What he said. Even though I had the hole saw, I ended up using a 3' (yes, 3 feet long) 1/2" drill bit to remove the first baffle as described above and then drill 4 holes in the second baffle. Sounds perfect to my ears. i.e. much louder than stock, much quieter than any of the aftermarket pipes I've heard.

Todd Richmond Grapevine, TX USA '78 R80 /7 '06 FJR1300A