I have one of the 1-1/2" and one of the 1-1/4" saws on the way back to me. There is another 1-1/2" out there somewhere. I'll post up when they return. If anyone wants to use them in Georgia, I'll bring them along. All I did to make them was cut bi-metal bit in 2 and weld in a piece of same size tubing (appx 30") between the pieces. Grind down the welds and have at it: not very hi-tech, but cheap thrills that sound pretty good. Send me a ship to address if you want to try one.
Mike Sr.
