Bonneville America Forums Forums Technical Forums Performance Mods Factory Pro jet kit

Has anyone used the Factory Pro jet kit available a Ma's Cycles
yet? I saw the kit listed and have no experience with that brand. I keep hoping for a kit from Dyna Jet, I've had good
luck with their stuff.

Todd

Hey Todd, we use these jet kits on all Bonnie Americas we put pipes on. They are especially useful in that you can dial them in to match the flow characteristics of your pipes (ie.the configuration will differ when using TORs as opposed to Bubs for instance). We love 'em here at Manayunk Triumph! I highly reccommend them.

Here is the DynaJet Kit for America/Speedmasters available from Jack Lilley.

Factory Pro has good instructions for rejetting carbs. Try these clicks:

http://factorypro.com
MC Tech (in the left side frame)
CV Carb Tuning

I used these instructions to rejet my carbs when I upgraded my pipes. I took a little guesswork up front and some work to try the different combinations, but I'm pretty satisfied with my results. Of course, these instructions are not specifically for 'our' bikes. Use them as a general guide.

John