Check out the new Gallery
wicked red 1100
wicked red 1100
by mag10, August 21
Windshield I need to replace
Windshield I need to replace
by philwarner, May 10
first ride
first ride
by NemoJr, April 1
Steve McQueen inspired
Steve McQueen inspired
by Feral, November 28
GaRally22
GaRally22
by chy, September 18
Previous Thread
Next Thread
Print Thread
Can slip -on's be "too tight"
#566775 06/04/2015 9:07 PM
Joined: Jan 2008
Posts: 199
sbs287 Offline OP
Adjunct
OP Offline
Adjunct
Joined: Jan 2008
Posts: 199
Official Disclaimer: I'm NOT.....repeat NOT!!! mechanically inclined.

That being said, I have a set of Thunderbike's on my '03 BA. There was always a bit of play in the pipes laterally. I could move them an inch or so side to side while mounted. Is this how they are supposed to be? I tightened them up so they are now solid. My bike now gets terrible gas mileage ever since this. Just wondering if the pipes are restricting exhaust flow since I tightened things up (I do tend to over-torque things), or something else? I have already changed plugs and the air filter but that is where my mechanical knowledge ends. I also really don't notice any gross change in performance. HELP!!!


2003 TBA Thunderbike pipes / floorboards / and the most uncomfortable seat known to man.... Barry aka: 8-Ball
Re: Can slip -on's be "too tight"
sbs287 #566776 06/04/2015 11:08 PM
Joined: May 2007
Posts: 5,066
Likes: 1
Saddle Sore
Offline
Saddle Sore
Joined: May 2007
Posts: 5,066
Likes: 1
That is odd, the gas mileage. I have a set of Thunderbike pipes, they are great and non-restrictive. And yes, they should be tight and have no play, in or out or side to side. Use the hi-temp red silicone. If they were loose, you would have heard that tickety exhaust leak noise and you would have some backfiring and tell tale ashy marks.

Have the carbs been re jetted or screws turned lately ?


2005 Model . Two Fast Eddy stickers , a bell and a clock . She's Lola . She tinkles and keeps time . http://s649.photobucket.com/albums/uu211/britbike05/
Re: Can slip -on's be "too tight"
Wade #566777 06/04/2015 11:22 PM
Joined: Jan 2008
Posts: 199
sbs287 Offline OP
Adjunct
OP Offline
Adjunct
Joined: Jan 2008
Posts: 199
Nope. I have had this bike for 10 years with those pipes on the whole time. Never messed with the carbs.


2003 TBA Thunderbike pipes / floorboards / and the most uncomfortable seat known to man.... Barry aka: 8-Ball
Re: Can slip -on's be "too tight"
sbs287 #566778 06/05/2015 4:47 AM
Joined: Jan 2015
Posts: 220
Likes: 2
Adjunct
Offline
Adjunct
Joined: Jan 2015
Posts: 220
Likes: 2
I've got staintune pipes on my 07 america and I can wriggle them around the same as yours until I tighten them up, even then I can move them if I push hard enough on them, your change in fuel consumption has nothing to do with this.

Re: Can slip -on's be "too tight"
Peter_AU #566779 06/05/2015 11:46 AM
Joined: Sep 2014
Posts: 83
Member
Offline
Member
Joined: Sep 2014
Posts: 83
Seems to be they should be tight. Id start looking at other probabile causes. Maby somethign wrong with the carb or are you just riding it harder?


14 America LT 19" EMGO Turnouts AI removed
Re: Can slip -on's be "too tight"
sbs287 #566780 06/05/2015 12:20 PM
Joined: Jan 2005
Posts: 5,251
Likes: 13
Saddle Sore
Offline
Saddle Sore
Joined: Jan 2005
Posts: 5,251
Likes: 13
Barry, what kind of mpg are you getting now? And what was the previous mpg?


It's not speeding till you get pulled over.
https://www.youtube.com/watch?v=Bqa1s4jhkQ8
Re: Can slip -on's be "too tight"
mikemm03 #566781 06/05/2015 3:06 PM
Joined: Jan 2008
Posts: 199
sbs287 Offline OP
Adjunct
OP Offline
Adjunct
Joined: Jan 2008
Posts: 199
Mike. I was pushing close to 50 mpg before. Getting mid-30's now. Very frustrating.


2003 TBA Thunderbike pipes / floorboards / and the most uncomfortable seat known to man.... Barry aka: 8-Ball
Re: Can slip -on's be "too tight"
sbs287 #566782 06/05/2015 3:40 PM
Joined: Jan 2005
Posts: 5,251
Likes: 13
Saddle Sore
Offline
Saddle Sore
Joined: Jan 2005
Posts: 5,251
Likes: 13
Rather bizarre. I assume it's running fine? Does it smell rich, exhaust tips real sooty? Has the bike been in winter storage and you just got her out? Recheck the exhaust to make sure no critter nests are in there causing a restriction. Same with the air filter, recheck it for blockage. Brake dragging? Tire pressure? Low compression would effect mileage as well but I doubt that's an issue.
I would recheck the plug and coil wires.
Could it be additives to the fuel in your area?


It's not speeding till you get pulled over.
https://www.youtube.com/watch?v=Bqa1s4jhkQ8
Re: Can slip -on's be "too tight"
mikemm03 #566783 06/05/2015 6:04 PM
Joined: Jan 2008
Posts: 199
sbs287 Offline OP
Adjunct
OP Offline
Adjunct
Joined: Jan 2008
Posts: 199
The exhaust tips are a bit sooty. Too rich possibly??


2003 TBA Thunderbike pipes / floorboards / and the most uncomfortable seat known to man.... Barry aka: 8-Ball
Re: Can slip -on's be "too tight"
sbs287 #566784 06/06/2015 5:16 PM
Joined: Jan 2005
Posts: 5,251
Likes: 13
Saddle Sore
Offline
Saddle Sore
Joined: Jan 2005
Posts: 5,251
Likes: 13
Could be. Can you access the mix screws on the bottom side of the carbs? Turn them in clockwise until they just bottom out. Easy does it.Count the turns for reference. Now back them out one and three quarters of a turn. Go for a ride and see how she does. If you get excessive popping turn them out another quarter turn.


It's not speeding till you get pulled over.
https://www.youtube.com/watch?v=Bqa1s4jhkQ8

Moderated by  bennybmn, chy 

Link Copied to Clipboard
Powered by UBB.threads™ PHP Forum Software 7.7.4