Bonneville America Forums Forums Technical Forums Exhaust Newbie Exhaust Advice

Hey guys,

Hoping to find out if the exhaust/muffler size and set up is the same for the Americas and Speedmasters? Also would Carbed and EFI make a difference?

Just purchased a carbed 06 America a couple weeks ago and already looking to upgrade the stock exhaust. I found a set of TORs on ebay from an 09 speedmaster and I have tried to find reading every thread possible to help me figure out if they will fit and had no such luck.

Any help and advice for a first time Triumph owner would be greatly appreciated!

Drew 1 go back and read everything you can on exhaust on here lots of good info. javascript:void(0) stepping off my soap box check the following thread
http://www.bonnevilleamerica.com/forums/...rt=1#Post507707

'09 Headers and exhausts will work on the carbed bikes. You may have to buy threaded plugs for the sensor bungs, not a big deal. If you are leaving your air intake alone you will only need to up your main jets a few notches.

There are two sellers with stock pipes in the classifieds.