Register Log In

Bonneville America Forums Forums Technical Forums General Tech 1 turn signal not working

Check out the new Gallery

wicked red 1100

wicked red 1100
by mag10, August 21

Windshield I need to replace

Windshield I need to replace
by philwarner, May 10

first ride

first ride
by NemoJr, April 1

Steve McQueen inspired

Steve McQueen inspired
by Feral, November 28

GaRally22

GaRally22
by chy, September 18

Print Thread

1 turn signal not working #563470 03/22/2015 4:32 PM
Joined: Jan 2005 Posts: 106 Maryland-Anne Arundel County get2bill OP Adjunct
OP get2bill Adjunct Joined: Jan 2005 Posts: 106 Maryland-Anne Arundel County	Looking for typical cause for 1 turn signal (right front in this case) to not work. Checked with meter and there is no juice coming to this signal. Could a bad relay cause just 1 turn signal not to work? Other possible causes? Any thoughts greatly appreciated! Last edited by get2bill; 03/22/2015 4:36 PM.

Re: 1 turn signal not working get2bill #563471 03/22/2015 6:01 PM
Joined: Aug 2007 Posts: 10,728 Likes: 5 St Louis MO roadworthy Should be Riding
roadworthy Should be Riding Joined: Aug 2007 Posts: 10,728 Likes: 5 St Louis MO	I'd be looking for a short or loose connector Always remember to be yourself. Unless you suck. Then pretend to be someone else.

Re: 1 turn signal not working get2bill #563472 03/22/2015 10:30 PM
Joined: Jun 2011 Posts: 407 Likes: 2 NW Florida, USA MattyMo Adjunct
MattyMo Adjunct Joined: Jun 2011 Posts: 407 Likes: 2 NW Florida, USA	The front control / switchgear connects to the main wiring in the headlight bucket. May want to check the connections and voltage at that point next. 09 America, some modifications

Re: 1 turn signal not working MattyMo #563473 03/23/2015 12:08 AM
Joined: Mar 2013 Posts: 497 Gordonton,New Zealand Cloudy Adjunct
Cloudy Adjunct Joined: Mar 2013 Posts: 497 Gordonton,New Zealand	Could it be a NASCAR bike? Only turns to the left? 05 Speedmaster,Reverse Cone Shortys,Thunderbike AIR Kit,K&N Air Filter,Snorkel Removed,Dynojet Stage 1 Kit(126 main),Needle-Clip 1 From Bottom,42 Pilot,NGK Iridium Plugs,Progressive Springs,Hagon 2810's,Barnett Green Springs,TTP Safe-Start,MOSFET R/R

Re: 1 turn signal not working Cloudy #563474 03/23/2015 1:53 PM
Joined: Aug 2014 Posts: 45 Jersey Shore HoldenAtriumpH Greenhorn
HoldenAtriumpH Greenhorn Joined: Aug 2014 Posts: 45 Jersey Shore	One quick process of elimination that might be worth it, try connecting the working left signal to the right signal's harness to see if it still works. If it does, then at least you know its just a bad signal and you dont have to go hunting for missing voltage. Just literally had this happen to me when I did my LED idiot light conversion. I ended up botching my right signal up somehow. But i didnt like them anyway and replaced with Lucas style. - 2007 Bonneville (Standard) -

Re: 1 turn signal not working HoldenAtriumpH #563475 03/23/2015 5:04 PM
Joined: Apr 2007 Posts: 3,063 Likes: 8 Timmins, Ontario Gregger Loquacious
Gregger Loquacious Joined: Apr 2007 Posts: 3,063 Likes: 8 Timmins, Ontario	Check the wiring connector at the right front signal light. It typically is white and the female portion of the connector gets loose - needs to be tighten with needle nose pliers. Sometimes the connector is hidden in the throttle cable housing. Easy to be fooled. 12 Rocket Roadster 03 Bonneville America 69 BSA Firebird Scrambler 73 Yamaha TX 750

Moderated by bennybmn, chy, mert

Link Copied to Clipboard

Powered by UBB.threads™ PHP Forum Software 7.7.4