Bonneville America Forums Forums Technical Forums Accessories T-100 cover on our rides ?

Ok, I think it fits, no oil coming out and it seems to shift fine. Seems like there was a thread awhile back about putting a T-100 clutch cover case on our bikes....but can't find it.......? concerned if anyone had done this and later wished they hadn't for mechanical reasons ?
The case was in Oklahoma City and they just wanted $35 for it and it does look cool on the Bonnie-A..

there was thread about that some time ago .....

picture !!!!!!!!!!!!!!!!!

Report : After some modification of the breather pipe-T (internal crankcase breather tube) and the fitting of the T-100 case.... I had concern of the proper pressure for shifting....after a 30 mile test drive, all is well and if my calculations are correct .... I've picked up an additional 5-horse power and at least 3-more miles per gallon

Just saw this... i put one of those on my bike a while back- easy swap- looks like you got it sorted out-

more info please?

The fastening bolts (some of them) will need to be shorter but just be careful with the internal vent tube (it attaches to the side cover) and just make sure your seals are lined up otherwise you will get blow bye from your bottom vent tube.....it is a fairly simple swap though.....