Register Log In

Bonneville America Forums Forums Technical Forums General Tech Oil Leak, down tube from cooler

Check out the new Gallery

wicked red 1100

wicked red 1100
by mag10, August 21

Windshield I need to replace

Windshield I need to replace
by philwarner, May 10

first ride

first ride
by NemoJr, April 1

Steve McQueen inspired

Steve McQueen inspired
by Feral, November 28

GaRally22

GaRally22
by chy, September 18

Print Thread

Oil Leak, down tube from cooler #486262 04/15/2012 8:27 PM
Joined: Jan 2005 Posts: 1,847 SW VA AngusPT OP Learned Hand
OP AngusPT Learned Hand Joined: Jan 2005 Posts: 1,847 SW VA	What size are those nuts? What is the procedure to tighten them, two nuts and the tube? Any help much appreciated. Looks like I get a new tool again..... Thanks for any help. Ride safe, and keep the oil in the bike, bad flash back to HD... Warren 04 Caspian Blue and Silver America

Re: Oil Leak, down tube from cooler AngusPT #486263 04/15/2012 9:46 PM
Joined: Mar 2007 Posts: 5,616 Sammamish, Washington - USA Zmilin Check Pants
Zmilin Check Pants Joined: Mar 2007 Posts: 5,616 Sammamish, Washington - USA	Replace the crush washers and tighten to specs: Oil feed pipe to cylinder head banjo bolts (M14 bolts, upper pipe) 30nm Oil feed pipe to oil cooler banjo bolt (M18 bolt, upper pipe) 45nm SOLD: 07 Black BA, 39mm FCRs, TPUSA stage 1 head, TPUSA 813 cams, TPUSA 10.8:1 pistons, TTP #3 igniter, Specialty Spares Long Cannons, Tsukayu Hard Bags. 82HP/55tq NEW: 19 Goldwing Tour DCT

Re: Oil Leak, down tube from cooler Zmilin #486264 04/16/2012 6:08 PM
Joined: Jan 2005 Posts: 1,847 SW VA AngusPT OP Learned Hand
OP AngusPT Learned Hand Joined: Jan 2005 Posts: 1,847 SW VA	This is where the oil tube enters the engine on the bottom. The oil cooler return pipe connection. Any idea what size open end wrenches are required? Thanks for any help. Warren 04 Caspian Blue and Silver America

Re: Oil Leak, down tube from cooler AngusPT #486265 04/16/2012 6:12 PM
Joined: Jan 2005 Posts: 1,847 SW VA AngusPT OP Learned Hand
OP AngusPT Learned Hand Joined: Jan 2005 Posts: 1,847 SW VA	Don't have any wrenches that big, so I get to buy a New One, Yay! Warren 04 Caspian Blue and Silver America

Re: Oil Leak, down tube from cooler AngusPT #486266 04/16/2012 6:53 PM
Joined: Mar 2007 Posts: 5,616 Sammamish, Washington - USA Zmilin Check Pants
Zmilin Check Pants Joined: Mar 2007 Posts: 5,616 Sammamish, Washington - USA	I got the above info from the tech vault... (The Vault > Tech Basics > Tourqe Specs) or CLICK HERE! BTW... I keep a copy printed out and in my Hanes manual. Its usually easier to find specs on the printout vs the book. Last edited by Zmilin; 04/16/2012 6:54 PM. SOLD: 07 Black BA, 39mm FCRs, TPUSA stage 1 head, TPUSA 813 cams, TPUSA 10.8:1 pistons, TTP #3 igniter, Specialty Spares Long Cannons, Tsukayu Hard Bags. 82HP/55tq NEW: 19 Goldwing Tour DCT

Re: Oil Leak, down tube from cooler Zmilin #486267 04/18/2012 2:57 PM
Joined: Mar 2008 Posts: 1,586 Likes: 1 Alberta,Canada marty Learned Hand
marty Learned Hand Joined: Mar 2008 Posts: 1,586 Likes: 1 Alberta,Canada	Buy the sockets er ya might hurt your hands,and it's easy'r to put a socket on a torque wrench

Re: Oil Leak, down tube from cooler AngusPT #486268 04/19/2012 7:38 PM
Joined: Jan 2005 Posts: 1,847 SW VA AngusPT OP Learned Hand
OP AngusPT Learned Hand Joined: Jan 2005 Posts: 1,847 SW VA	That would be 24 mm wrench for the fittings Warren 04 Caspian Blue and Silver America

Moderated by bennybmn, chy, mert

Link Copied to Clipboard

Powered by UBB.threads™ PHP Forum Software 7.7.4