 Upper Yoke Bracket
|
Joined: Oct 2010
Posts: 75
Member
|
OP
Member
Joined: Oct 2010
Posts: 75 |
Hi all, I just purchased a used Roadstar screen for my America and found that it is missing the upper yoke brackets.  Rather than wait for Triumph to order them in (if they sell them seperately), I thought I would make a set. Could someone please post the dimensions of these brackects for me (metal thickness, width, length hole dimensions etc). I would truely appreciate it. Cheers
Softens your hands while you do the dishes - You're soaking in it!!!!
|
|
|
Re: Upper Yoke Bracket
|
Joined: Mar 2007
Posts: 5,616
Check Pants
|
|
Check Pants
Joined: Mar 2007
Posts: 5,616 |
can you clarify what you mean by upper yoke bracket? Im not following right now.
SOLD: 07 Black BA, 39mm FCRs, TPUSA stage 1 head, TPUSA 813 cams, TPUSA 10.8:1 pistons, TTP #3 igniter, Specialty Spares Long Cannons, Tsukayu Hard Bags. 82HP/55tq
NEW: 19 Goldwing Tour DCT
|
|
|
Re: Upper Yoke Bracket
|
Joined: Oct 2010
Posts: 75
Member
|
|
OP
Member
Joined: Oct 2010
Posts: 75 |
Hi Zmilin,
They are a small bracket (approx 100mm / 4" long) that bolt under the cross member on the forks, either side of the speedo. The top arms on the screen bolt into them. i hope that makes sense.
Cheers
Softens your hands while you do the dishes - You're soaking in it!!!!
|
|
|
Re: Upper Yoke Bracket
|
Joined: Mar 2007
Posts: 5,616
Check Pants
|
|
Check Pants
Joined: Mar 2007
Posts: 5,616 |
Ah... those are supplied with the screen. Sounds like part #5 in the first picture of the instructions... Screen instructions here: http://triumphinstructions.com/ProdDocs/A9748030-EN.pdf
Last edited by Zmilin; 05/12/2011 6:04 PM.
SOLD: 07 Black BA, 39mm FCRs, TPUSA stage 1 head, TPUSA 813 cams, TPUSA 10.8:1 pistons, TTP #3 igniter, Specialty Spares Long Cannons, Tsukayu Hard Bags. 82HP/55tq
NEW: 19 Goldwing Tour DCT
|
|
|
Re: Upper Yoke Bracket
|
Joined: Oct 2010
Posts: 75
Member
|
|
OP
Member
Joined: Oct 2010
Posts: 75 |
Softens your hands while you do the dishes - You're soaking in it!!!!
|
|
|
Re: Upper Yoke Bracket
|
Joined: Feb 2007
Posts: 23,227 Likes: 62
Fe Butt
|
Fe Butt
Joined: Feb 2007
Posts: 23,227 Likes: 62 |
at least they look like they would be easy to make if you could see one to copy or put the shield on and hold it in place to measure.
I learned all I need to know about life by killing smart people and eating their brains.
Eat right ,Exercise ,Stay fit, Die Anyway!
|
|
|
Re: Upper Yoke Bracket
|
Joined: Jan 2005
Posts: 749
Adjunct
|
|
Adjunct
Joined: Jan 2005
Posts: 749 |
Terry,
If it's part #5 in the above instructions, those are 2 separate parts, each about 1 1/2" maybe 2" at most, which mount to each side of the speedo and the upper arms from the wind screen mount into that bracket. Those are not 4". I leave them on my bike which makes it easier to throw the screen on when it gets cold...Plus they are a pain in the ass to mount.
"It's a hundred and six miles to Chicago, we've got a full tank of gas, half a pack of cigarettes, it's dark, and we're wearing sunglasses."
|
|
|
|
|
