Bonneville America Forums Forums Technical Forums Accessories high and tight lightbar

I've got this question going on two separate threads http://www.bonnevilleamerica.com/forums/...0&fpart=all

sorry for the over-lap, but please continue with the words of wisedom!

...problem solved, turned out to be a bare wire touching the inside of the light bucket.... I gotta say though, this toggle switch inside the bucket is a pretty poor design, it's impossible NOT to bend and cramp the hot wires when you screw it together, seems like the switch should have been drill out lower in the bucket to avoid that, but what the hell do I know


thanks for the replies, repo